Automatic Security Full Height Turnstile Double Lane With Impact
Model: RNCF21238FS-1 Dual Passage Full Height Turnstile
> RONA full height turnstiles offer secure, efficient pedestrian
traffic. All turnstiles are designed and manufactured to the
highest specification, using top quality components and materials
to ensure ongoing robust, reliable operation.
> The RNCF21238FS-1 with 4-arms, 90 degree spacing; Single
passageway; effectively prevent crawing and climbing; with impact
> The RNCF21238FS-1 consists of rotor assembly, barrier section,
mechanism housing and ceiling plate.
> The rotor assembly consists of three rotors, each containing
10 arms spaced equally 510mm apart. Each rotor post is set at a
apposition 90 degrees apart from each other. Each arm is attached
to the rotor posts with a solid spigot. Rotors are then bolted to
the upper and lower bearing assemblies, thereby providing a full
mechanical construction. The barrier consists of a barrier post and
10 arms equally spaced at an offset to the rotor assembly. Arms are
attached mechanically over solid spigots.
> With semi-automatic structure, after turnstiles receiving a
legal signal, people need to manually push the arms to finish one
passing action. The turnstile works stably, safely and reliable.
> The full height turnstile system is provided with a standard
electric interface and is easily integrated into the 3rd party
equipment with read/write facilities, such as Biometric reader,
consumption system, ESD system and access control system etc.
> As a result, an orderly and civilized passage is provided for
the personnel in and out, and illegal personnel can be barred. At
the same time, a special fire control interface is equipped in the
system to meet the requirement of fire control passage, so that a
rapid down rod control may be realized in emergency for.
The Full Height Turnstile can be widely used in some high security
places, typical areas of application are: prison, stadium, parking
system area , and so on.
STANDARD FEATURES & FUNCTIONS:
> The turnstile system can easily integrates with the 3rd party equipment, such as Biometric reader,consumption system, ESD
system and access control system etc, Rapid identification
technique, available to identify accurately and efficiently the
magnetic card, bar code card, ID/IC card etc.
> Operation model: Both directions can be set as controlled mode
or free mode, two or one direction can be controlled by switch-
button or access controller.
> Available with 4-arm, 90 degree spacing (default) or 3-arm,
120 degree spacing (optional).
> Anti backup function: to prevent reverse rotation once the
mechanism has move 60 degree from home.
> The running status of device can be set up through pressing
the built-in small keyboard of the main control board.
> When power off, the center rotor will be set free model
(default) or be locked model (optional).
> Emergency-escape function: the center rotor will be set free
automatically by pressing the emergency button which can be
remote-controlled whether the power is on or not.
> Reset automatically function: Go signal will be cancelled if
passage through is not completed within pre-set time. The standard
default is 10 seconds (time adjustable by changing parameter of
main control board).
> Remote control and management function: Through the management
computer to realize remote control and management.
OPTIONAL & CUSTOMIZED FUNCTIONS:
> Alternative Materials, Finishes and Custom Design
> Usage LED Counter function
> Audio and visual alarm in the event of an invalid entry or
exit and tailgating
> Extra add sensors transmitter and receiver type
> Infrared sensors reset function
> Access Control System Integration
> Camera System Integration
> Thermostat System Integration
304# Stainless Steel (default), 201# or 316# Stainless Steel
Thickness of ply:
Brushed surface / Polished surface / Anti-Fingerprints surface
The inductive card reader dimension:
equipped with the standard mounting brackets, or tailor.
Card Reader mounting:
Card readers may be mounted on the surface of the barrier, or the
card readers may be mounted flush mounted. There is an output to
interlock the card.
Time of opening / closing:
Time to work after power on:
Reset time after breaking down:
RS485, distance ≤1200m (standard) ; Available to connect with
external CAN BUS and Ethernet (Optional)
relay dry contact signal; +12V level signal or pulse width>100ms
12V pulse, drive current>10mA
-10℃ ~ 70℃, Indoor / Outdoor
The turnstile provides bi-directional access control. Each
direction may be in one of three states:
> Free passage: all person are authorized to pass under all
> Controlled access: each person must use a card reader before
being authorized to pass
> Lane closed: no persons are authorized to pass, and security
cards are ignored
Shenzhen Rona Intelligent Technology Co., Ltd is a Chinese
manufacturing firm located in Shenzhen. When you are ready to find
out how we can service your needs, use the information listed here
to reach our sales and service office. Monday to Friday: 8:30am -
6:00pm (UTC/GMT +8). We look forward to hearing from you.
Head office: A603, 6F, Yousong Technology Building, E Ring 1st Rd,
Loghua Town, Bao'an, Shenzhen, China, 518109
Factory: 3F&4F, Building C, Longlian Industrial Zone, Zhonghua
Rd, Longhuan Town, Bao'an, Shenzhen, China, 518109
Contact Person: Ms. Sophia Wey
Tel: +86-755-88853586 ext 8039
Fax: +86-755-88853586 ext 8002