Barcode Cargo Door Waist Height Turnstiles , Electric Access
Introduce of sliding turnstile gates :
Intelligent Sliding door through years of careful development,
research and production of intelligent channel management
equipment, mainly for personnel access to the intelligent
management of high-tech products.The equipment organically
integrated mechanical, electronic, microprocessor control, and a
variety of identity recognition technology. Optional various
identification system devices and reliable security protection
devices, alarm device, direction, and extended a friendly LED count
display interface, to coordinate channel intelligent control and
management.Intelligent swing gate easily compatible IC cards, ID
cards, bar code cards, fingerprint reader.To realize access
personnel civilized and orderly passage way, the effective
management of personnel access. Can be widely used in stations,
docks, subways, factories, buildings, intelligent community,
hotels, clubs, corporate.
Functions and Features of the sliding gates :
1. Problem-self-checking function.
2. Many options of working ways: bi-direction card reading; one
direction card reading and another no reading; one direction card
reading and another freely. And single direction photocell
controlled passing and close. Working ways can be set in the
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right. And the regulated time period for passing can
be set by managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the flap barrier
and then take a valid card to be read for passing.
7. Flap barrier is with 485 interface for long-distrance control
8. Anti-rush function: if there is no open single, arm will be
9. Double anti-clipping function: photocell anti-clipping and
mechanical anti-clipping.When passenger is going through the flap
barrier, photocell will detect out this situation and will not
close. After passenger passed, arm will close automatically. During
its reposition, if arm meets any obstacle, arm will get back
automatcially or stop working for a while with very slight force.
Also it will alarm.
10. Flap barrier is with standard electrical interface for the
integration of various readers and writers.
11. Flap barrier can count how many passenger has passed and will
show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Flap barrier can control the population inside in the control
15. Stable running with little noise.
SPECIFICATIONS of sliding gates
1) Compact design, yet offer sufficient space to integrate any
2) Frame material: 304 stainless steel
3) Angles: 90 or 120°
4) Size: (W)300x(L)1400x(H)2310mm or customized
5) Drive: manually operating
6) Rotation direction: bi-directional and unidirectional
7) Controller: adapts micro-computer controller can be 7 programmed
according to customer needs
8) Interface: standard input and output interfaces can be used for
other integration systems
9) Signal source: dry contact and high-low level signals
10) Roller working voltage: 220V AC ±10%
11) Voltage: 220V AC ±10%, 24V DC at 3A ±10% and 12VDC at 3A ±10%
12) Indoor/outdoor temperatures: -10to 70°C
13) Indoor/outdoor humidity range: 95%
14) Switching time: 1s
15) Traffic speed: 30~35 persons/minute
16) Fault status: power-off and giving free exit/entry path
17) Movement failure rate: More than 5millions
18) Frame protection: waterproof seal
19) Card reader location: 4
20) Installation and maintenance access: 1
21) Optional: IC/ID reader, barcode reader, other R/W equipment,
UPS and infrared detectr
|Structure||Frame structure/standard stainless steel shell|
|Production||full CNC laser cutting machine production|
|Maximum channel width||550-600mm|
|Gate opening time||0.2 seconds|
|Drive motor||brushless DC motor (24V)|
|Power on state required time||1 seconds|
|Failure automatically reset time||10 seconds|
|Single movement N.W.||80KG|